This Yamaha FZ6N retrofit kit contains everything you need to convert your old halogen setup into a powerful new bi-LED (both low and high beam LED) headlight. Featuring custom-made mounting brackets, all the correct wiring, and an OEM-style shroud, it makes retrofitting quick and easy. Everything fits inside your existing headlight; the leveling system will work as usual, and there’s no need to cut or solder your original wiring
You’ll have brilliant LED brightness on both low and high beam, and the light pattern is sharply defined; you won’t blind oncoming traffic. And, of course, most importantly: this kit will take your FZ6N to the next level – just check out the test pictures!
Representing the very latest retrofitting technology, the included bi-LED projector is the first to equal the maximum brightness of top bi-xenon setups. This gives you all of the upsides and none of the downsides. In contrast to xenon, LED achieves maximum brightness instantly and retains maximum output throughout its working life (xenon bulbs gradually lose up to 70%). It also lasts about twice as long as xenon bulbs. With a fixed 6,000K LED, the crystal-clear 2.5-inch lens throws a wide low beam with a bright hotspot and sharp cutoff. The high beam? It's like the sun.You will literally outshine the competition.
Such a light output would not be possible without an efficient driver. And the supplied driver is small so it's easy to install and completely potted so the electronics are protected against moisture. This makes for easier retrofitting and immediately provides full brightness when you activate the LED. It’s the perfect driver to complement the included Yamaha FZ6N wire harness, which connects directly to the original wiring. A high beam splitter is also included, making for easy integration of the bi-LED mechanism. Power supply is strong, steady and reliable.
Lastly, this kit provides every single part that you will need for retrofitting. Please note, though, that in order to keep the price down, we have limited the basic kit to only include those quality parts that are strictly necessary. You may wish to add a delay relay, which reduces the load on the sensitive electronic circuit by delaying headlight activation until 10 seconds after ignition key turn, as well as breathing vents, which prevent moisture build-up inside the headlight.
You may also wish to add a delay relay, which reduces the load on the sensitive electronic circuit by delaying headlight activation until 10 seconds ignition key turn, as well as breathing vents, which prevent moisture build-up inside the headlight.
This complete Yamaha FZ6N retrofit kit is inspected by our internal quality control prior to shipping and comes with a solid 2-year warranty. It also includes highly-rated technical support from your lighting experts at Retrofitlab.com
Should you have any questions prior to purchase, please check out our FAQ page or refer to the chatbox in the FAQ section.
We look forward to brightening your day (not to mention your night)!
This is a fairly straightforward retrofit that even complete novices can do, but those with more skills and experience will be quicker. Discounting removal and replacement of the headlights, you could expect the job to take anything from one to three hours.
Simply open the Yamaha FZ6N headlight (sealed with butyl, so that’s a quick job), mount the projector and shroud, and reseal. Done.
Want to have the kit installed by a professional? Check out list of installers
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.
The product images shown are for illustration purposes only and may not be an exact representation of the product. Actual products may vary due to changes in manufacturing/product enhancements.
The product/kit pictures can differ from what you have received/will receive because we use generic pictures for the kits. Because with all the different options/product changes etc. it's nearly impossible for us to take pictures for all the kits we have and with all the different options. For example, butyl sealant can be shown in the picture, but with headlights that are originally sealed with butyl, it won't be in the kit.
This complete kit has been specially developed to enable retrofitting at home, saving you the cost of installation. However, should you prefer to have a professional carry out the retrofit, you can simply mail your headlights to the nearest participating workshop. They will then perform the retrofit and return the upgraded headlights to you, ready for use.
Please note that, for professional retrofits, you should order your Retrofitlab kit or parts directly from the workshop in question (it saves you money on shipping).
To find the nearest workshop, please refer to Professional retrofitting