This Zero DS / DSR retrofit kit contains everything you need to convert your old halogen setup into powerful new bi-LED (both low and high beam LED) headlight. Featuring custom-made mounting brackets, all the correct wiring and an OEM-style shroud, it makes retrofitting quick and easy. Everything fits inside your existing headlight; the levelling system will work as usual; and there’s no need to cut or solder your original wiring
You’ll have brilliant LED brightness on both low and high beam, and the light pattern is sharply defined; you won’t blind oncoming traffic. And, of course, most importantly: this kit will take your DS / DSR to the next level – just check out the test pictures!
Representing the very latest retrofitting technology, the included bi-LED projector is the first to equal the maximum brightness of bi-xenon setups. This gives you all of the upsides and none of the downsides. In contrast to xenon, LED achieves maximum brightness instantly and retains maximum output throughout its working life (xenon bulbs gradually lose up to 70%). It also lasts about twice as long as xenon bulbs. With a fixed 6,000K LED, the crystal-clear 3.0-inch lens throws a wide low beam with a bright hotspot and sharp cutoff. The high beam? It's like the sun.
You will literally outshine the competition.Such a light output would not be possible without an efficient driver. And the supplied driver is small so it's easy to install and completely potted so the electronics are protected against moisture. This makes for easier retrofitting and immediately provides full brightness when you activate the LED. It’s the perfect driver to complement the included Zero DS / DSR wire harness, which connects directly to the original wiring. A high beam splitter is also included, making for easy integration of the bi-LED mechanism. Power supply is strong, steady and reliable.
Lastly, this kit provides every single part that you will need for retrofitting. Please note, though, that in order to keep the price down, we have limited the basic kit to only include those quality parts that are strictly necessary. You may wish to add a delay relay, which reduces the load on the sensitive electronic circuit by delaying headlight activation until 10 seconds after ignition key turn, as well as breathing vents, which prevent moisture build-up inside the headlight.
You may also wish to add a delay relay, which reduces the load on the sensitive electronic circuit by delaying headlight activation until 10 seconds ignition key turn, as well as breathing vents, which prevent moisture build-up inside the headlight.
This complete Zero DS / DSR retrofit kit is inspected by our internal quality control prior to shipping and comes with a solid 2-year warranty. It also includes highly rated technical support from your lighting experts at Retrofitlab.com
Should you have any questions prior to purchase, please check out our FAQ page or refer to the chat box below.
We look forward to brightening your day (not to mention your night)!
Installation
This is a fairly straightforward retrofit that even complete novices can do, but those with more skills and experience will be quicker. Discounting removal and replacement of the headlights, you could expect the job to take anything from one to three hours.
Simply open the Zero DS /DSR headlight (not sealed with a hard to open sealant), so that’s a quick job), mount the projector and shroud, and reseal. Done.
FAQ and DIY information
For general installation and DIY information, please check our FAQ and/or DIY pages.
FAQ for frequently asked questions, and answers :-), about products, product information ordering, shipping, returns, warranty, etc. You can find the FAQ PAGE HERE
DIY for Do It Yourself information about installation, product details etc. You can find the DIY PAGE HERE
Professional installation
This complete kit has been especially developed to enable retrofitting at home, saving you the cost of installation. However, should you prefer to have the kit installed by a professional? Check out the LIST OF DEALERS / INSTALLERS
Please note that, for professional retrofits, you should order your Retrofitlab kit or parts directly from the workshop in question (it saves you money on shipping).
Disclaimers
These products are not ECE or DOT/FMVSS108 approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage. You can find more info HERE
The product images are for illustration purposes only and may not be an exact representation of the product. Actual products may vary due to changes in manufacturing/product enhancements. You can find more info HERE
This customer video is intended to provide a general idea of the output and light pattern from a projector retrofit. It does not necessarily represent the exact setup in this product/kit, it's made with the Optimus TR mini with Osram bulbs
Worldwide Tracked shipping
We are based in Europe (the Netherlands) and we ship worldwide. So shipping to the United States, Australia, Canada etc. is not a problem at all.
All our orders have a track and trace / tracking code, so you can check the progress. The orders are processed by ourselves and send out from our own warehouse.
Delivery Time
We are known for our fast deliveries. All delivery times start when we have received your payment. The products that are in stock will normally be shipped within 1 working day. The shipping time varies based on the destination. Please check the estimated shipping (working) days and costs below. We ship directly from our warehouse in The Netherlands.
Shipping costs
Almost all of our orders will be shipped by tracked parcel shipping. We try to use the best option based on price, delivery speed and service. Most of our shipments are shipped with UPS, sometimes we also use DPD or PostNL.
You can find the shipping costs and shipping times for parcel shipping for inside and outside the EU in the table below.
| Zone | Countries | Price | Working days est. delivery |
| Domestic - UPS | The Netherlands | € 7,99 | 1-2 |
| EUR 1 - UPS | Belgium, Germany, Luxembourg | € 10,98 | 2-3 |
| EUR 2 - UPS | Austria, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, Greece, France, Hungary, Ireland, Italy, Latvia, Lithuania, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden | € 14,98 | 3-5 |
| EUR 3 - UPS | United Kingdom, Norway, Switzerland | € 17,49 | 3-6 |
| Rest of Europe - UPS | € 19,98 | 5 | |
| US - UPS | United States | € 34,50 / ~$ 38 | 5 |
| Rest of the World - PostNL | € 35,95 | 10 |
Tracking shipments
When you choose parcel shipping, you can follow your shipment. You will receive an e-mail from us with a tracking code as soon as your order leaves our door.
Delivery
The carriers for parcel shipping choose their own schedule for deliveries. Remember that you need to be present at the delivery address during working days from 9 till 5 in order to receive your order. It remains your responsibility to make arrangements for the way that the order is received at the delivery address. Orders we sent by envelope will arrive, even if you are not at home.
UK prices, shipping and taxes
UK prices / taxes are based on the order amount. For more information please see this FAQ item: UK prices and taxes.
You can find other products in the collection; Zero DS / DSR
