This Yamaha FZ6N retrofit kit contains everything you need to convert your old halogen setup into a powerful new bi-LED (both low and high beam LED) headlight. Featuring custom-made mounting brackets, all the correct wiring, and an OEM-style shroud, it makes retrofitting quick and easy. Everything fits inside your existing headlight; the leveling system will work as usual, and there’s no need to cut or solder your original wiring
You’ll have brilliant LED brightness on both low and high beam, and the light pattern is sharply defined; you won’t blind oncoming traffic. And, of course, most importantly: this kit will take your FZ6N to the next level – just check out the test pictures!
Representing the very latest retrofitting technology, the included bi-LED projector is the first to equal the maximum brightness of top bi-xenon setups. This gives you all of the upsides and none of the downsides. In contrast to xenon, LED achieves maximum brightness instantly and retains maximum output throughout its working life (xenon bulbs gradually lose up to 70%). It also lasts about twice as long as xenon bulbs. With a fixed 6,000K LED, the crystal-clear 2.5-inch lens throws a wide low beam with a bright hotspot and sharp cutoff. The high beam? It's like the sun.
You will literally outshine the competition.Such a light output would not be possible without an efficient driver. And the supplied driver is small so it's easy to install and completely potted so the electronics are protected against moisture. This makes for easier retrofitting and immediately provides full brightness when you activate the LED. It’s the perfect driver to complement the included Yamaha FZ6N wire harness, which connects directly to the original wiring. A high beam splitter is also included, making for easy integration of the bi-LED mechanism. Power supply is strong, steady and reliable.
Lastly, this kit provides every single part that you will need for retrofitting. Please note, though, that in order to keep the price down, we have limited the basic kit to only include those quality parts that are strictly necessary. You may wish to add a delay relay, which reduces the load on the sensitive electronic circuit by delaying headlight activation until 10 seconds after ignition key turn, as well as breathing vents, which prevent moisture build-up inside the headlight.
You may also wish to add a delay relay, which reduces the load on the sensitive electronic circuit by delaying headlight activation until 10 seconds ignition key turn, as well as breathing vents, which prevent moisture build-up inside the headlight.
This complete Yamaha FZ6N retrofit kit is inspected by our internal quality control prior to shipping and comes with a solid 2-year warranty. It also includes highly-rated technical support from your lighting experts at Retrofitlab.com
Should you have any questions prior to purchase, please check out our FAQ page or refer to the chatbox in the FAQ section.
We look forward to brightening your day (not to mention your night)!
Installation
This is a fairly straightforward retrofit that even complete novices can do, but those with more skills and experience will be quicker. Discounting removal and replacement of the headlights, you could expect the job to take anything from one to three hours.
Simply open the Yamaha FZ6N headlight (sealed with butyl, so that’s a quick job), mount the projector and shroud, and reseal. Done.
FAQ and DIY information
For general installation and DIY information, please check our FAQ and/or DIY pages.
FAQ for frequently asked questions, and answers :-), about products, product information ordering, shipping, returns, warranty, etc. You can find the FAQ PAGE HERE
DIY for Do It Yourself information about installation, product details etc. You can find the DIY PAGE HERE
Professional installation
This complete kit has been especially developed to enable retrofitting at home, saving you the cost of installation. However, should you prefer to have the kit installed by a professional? Check out the LIST OF DEALERS / INSTALLERS
Please note that, for professional retrofits, you should order your Retrofitlab kit or parts directly from the workshop in question (it saves you money on shipping).
Disclaimers
These products are not ECE or DOT/FMVSS108 approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage. You can find more info HERE
The product images are for illustration purposes only and may not be an exact representation of the product. Actual products may vary due to changes in manufacturing/product enhancements. You can find more info HERE
This complete kit has been specially developed to enable retrofitting at home, saving you the cost of installation. However, should you prefer to have a professional carry out the retrofit,
Wereldwijde verzending
We zijn gevestigd in Europa (Nederland) en we verzenden wereldwijd. Dus verzending naar de Verenigde Staten, Australië, Canada etc. is geen enkel probleem.
Al onze bestellingen hebben een track en trace / trackingcode, zodat u de voortgang kunt volgen. De bestellingen worden door ons zelf verwerkt en verzonden vanuit ons eigen magazijn.
Aflevertijd
Wij staan bekend om onze snelle leveringen. Alle levertijden gaan in op het moment dat wij de betaling hebben ontvangen. De producten die op voorraad zijn worden normaal gesproken binnen 1 werkdag verzonden. De verzendtijd varieert op basis van de bestemming. Bekijk hieronder de geschatte verzend(werk)dagen en -kosten. Wij verzenden rechtstreeks vanuit ons magazijn in Nederland.
Verzendkosten
Bijna al onze bestellingen worden verzonden als pakketverzending. We proberen de beste optie te gebruiken op basis van prijs, bezorgsnelheid en service. De meeste van onze zendingen worden verzonden met UPS, soms gebruiken we ook DPD of PostNL.
De verzendkosten en levertijden voor pakketverzending voor binnen en buiten de EU vind je in onderstaande tabel.
| Zone | Landen | Prijs | Werkdagen geschatte levering |
| Binnenland - UPS | Nederland | € 7,99 | 1-2 |
| EUR 1 - UPS | België, Duitsland, Luxemburg | € 9,98 | 2-3 |
| EUR 2 - UPS | Oostenrijk, Bulgarije, Kroatië, Tsjechië, Denemarken, Estland, Finland, Griekenland, Frankrijk, Hongarije, Ierland, Italië, Letland, Litouwen, Noorwegen, Polen, Portugal, Roemenië, Slowakije, Slovenië, Spanje, Zweden | € 14,98 | 3-5 |
| EUR 3 - UPS | Verenigd Koninkrijk, Noorwegen, Zwitserland | € 17,49 | 3-6 |
| Rest van Europa - UPS | € 19,98 | 5 | |
| VS - UPS | Verenigde Staten | € 34,50 / ~$ 38 | 5 |
| Rest van de wereld - PostNL | € 35,95 | 10 |
Zendingen volgen
Wanneer u kiest voor pakketverzending, kunt u uw zending volgen. Je ontvangt van ons een e-mail met een trackingcode zodra je bestelling onze deur verlaat.
Levering
De vervoerders van pakketvervoer kiezen hun eigen schema voor leveringen. Houd er rekening mee dat je op werkdagen van 9 tot 5 aanwezig moet zijn op het afleveradres om je bestelling in ontvangst te kunnen nemen. Het blijft uw verantwoordelijkheid om afspraken te maken over de manier waarop de bestelling op het afleveradres wordt ontvangen. Bestellingen die wij per envelop versturen, komen aan, ook als u niet thuis bent.
Britse prijzen, verzendkosten en belastingen
Britse prijzen / belastingen zijn gebaseerd op het orderbedrag. Zie voor meer informatie dit FAQ-item: Britse prijzen en belastingen.
You can find other products in the collection; Yamaha FZ6N
